Industry Floor Paint antislip® ground marking paint – Ampere capacity 5 l

Easy to apply, with anti-slip properties.
Ideally suited for application on industrial floors, in warehouses, technical rooms, garages, car parks and much more.
The special formula of the anti-slip floor marking colour guarantees anti-slip and grip-providing surfaces wherever hazardous areas may occur, thereby contributing to a safer environment.

Floor marking colour Industry Floor Paint antislip®
– Anti-slip properties (with added fine quartz granules)
– Easy to clean
– Does not yellow
– Rough appearance
– Chemical-resistant
– VOC: max. 500 g/l VOC
– Application temperature: +10 °C to +30 °C
– Application using a short-pile roller
– Thinning and tool cleaning: Diluant Floor Paint® thinner
– Drying time: dry after approx. 1 hour, recoatable after approx. 8 hours

Coverage: Up to 8 – 10 m²/l per coat

ATTENTION: Before application, the floor should be cleaned or cleared of dust.

IMPORTANT INFORMATION ABOUT INDUSTRY FLOOR PAINT ANTISLIP®
Test colour before application, as durability may vary depending on the substrate conditions and weather influences. When marking sealed or impregnated floors, we always recommend testing compatibility, drying time and adhesion of the colour. Brief sanding of the surface may be required, or a primer should be used to achieve optimal adhesion. If the surface is not treated accordingly, the marking colour may wear off again after only a short time.