Ref.: 569412 10

Traffic Protektor® special sealing paint – Ampere contents 500 ml, pack of 12

Traffic Protektor® special sealing paint – Ampere

protection for markings

Hazard class GHS07 – Attention, irritating substances
Hazard class GHS07 – Attention, irritating substances
Hazard class GHS02 – flammable, self-heating, self-reactive, pyrophoric, water-reactive, organic peroxides
Hazard class GHS02 – flammable, self-heating, self-reactive, pyrophoric, water-reactive, organic peroxides
pack of 12 only
229,00 €
Price / pack (Ex. VAT)
38,17 €
/ l
19,08 €
/ each
Total (Ex. VAT)
229,00 €
You will receive 12 items
Availability: 5-8 Working Days
Product description
  • Special paint to prevent soiling and protect markings
  • Increases the durability of a marking
  • Quick drying
  • Highly resistant to wear and weather
Traffic Protektor® special sealing paint protects the ground markings from becoming dirty and thereby increases their service life. The sealing paint is used with the New Perfekt Striper® ground marking device.

Once the ground marking has dried, simply apply the special Traffic Protektor sealing paint using the New Perfekt Striper® ground marking device and leave to dry.

Dry: approx. 20 min.
Hardened: approx. 4 h.
Can be driven on: approx. 12 h.

Pack of 12 x 500 ml cans net.

Yield: 1 box of Traffic Protektor is sufficient for approx. 2 boxes of ground marking paint.

ATTENTION: prior to application, the floor should be cleaned and any dust be removed.
Please note:
Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions. When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case. The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion. If the surface has not be prepared accordingly, the marking paint may peel off after a short period of time.
To prevent the can from clogging, briefly spray the nozzle free of residue after use.
Technical data
Signal wordGefahr
Hazard warningh222-H229: extremely flammable aerosol. Container is under pressure: can burst if heated. h319: causes severe eye irritation h336: may cause drowsiness and dizziness h412: harmful to aquatic organisms, with long-term effect
Supplementary hazard informationEUH066: repeated contact can lead to brittle or cracked skin.
Safety informationP101: If medical advice is needed, have product container or label at hand. P102: keep out of reach of children P210: keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke P211: do not spray on an open flame or other ignition source P251: Do not pierce or burn, even after use. P260: do not breathe dust/smoke/gas/mist/vapour/aerosol p410+P412: protect from sunlight, do not expose to temperatures exceeding 50°C P501: dispose of contents/container to …
Colourclear
Contents0.5 l
Drying time20 min
Hazard classGHS02 GHS07
Product typespecial paints for spray paint
Suppliedassembled
Weight7.1 kg
Safety data sheet
Manufacturer / EU responsible Person (GPSR)
Sustainability
Product with potential for future improvement

This product does not yet meet enough of our sustainability criteria. This does not mean that it has no sustainable properties – however, the total score is lower than 3 points. Therefore, it is not (yet) labelled as particularly sustainable. Our sustainability assessment is based on transparent, clearly defined ecological, social and economic criteria. The aim is to highlight development potential and create greater transparency.

You can find out more about product evaluation and our sustainability initiative on our information page.

Product CO₂ footprint

LCA functional unit
1
Recycled content in %?
0
CO2 footprint year of calculation
2026
LCA validity (in years)
1
CO2 footprint calculation method product
Calculated by our partner GlobalChanger (GreenZero) in accordance with ISO 14044 (LCA) / 14067 (PCF) (GWP100 [IPCC version]) principles.<br/>PCF values are product specific averages that have not been verified by third parties and may evolve as the data basis improves.
CO2 footprint system boundaries
Cradle-to-gate

PCF Lifecycle Breakdown

36.17kg CO₂e
LCA Raw Material Extraction & Processing
88.6%
LCA packaging production
1.6%
LCA Product Manufacturing
2.2%
LCA Inbound and Outbound Transportation
7.6%
‌
‌
‌
‌