DIY PPE fall protection set max. load 150 kg

The DIY PPE fall protection set is a practical all-rounder for DIY enthusiasts and is suitable for work at height where reliable personal fall protection is required. The configuration allows use in both vertical and horizontal directions, thereby supporting versatile tasks on ladders, roofs or comparable workplaces.

The set includes the HT 11 fall arrest harness with adjustable leg straps. This allows the harness to be adjusted to different body sizes and requirements. The stopfor™ BF-LS0. 3-41-15M/M10 guided-type fall arrester remains permanently connected to the rope. This design counteracts incorrect handling and supports safe use of the system.

A 1 m long webbing sling 19S enables attachment to suitable anchor points. The equipment is complemented by the blue TR 2000 safety helmet. It is included in the scope of delivery just like the Combipro backpack with 30 l capacity. The fall protection equipment can be neatly transported and stored securely inside it.

The set is designed for a max. load of up to 150 kg and weighs approximately 5.4 kg. Depending on the version, the fall arrest harness is available in sizes M or XL.

Thanks to the coordinated combination, the most important components are already provided for many DIY tasks. The DIY PPE fall protection set thus supports structured preparation and creates a practical basis for safe working in areas with a risk of falls.

Components:
– Fall arrest harness HT 11
– stopfor™ BF-LS0. 3-41-15M/M10
– Webbing sling 19S 1 m
– Safety helmet TR 2000 in blue
– Combipro 30 l