PremiumLine emergency shower combination – B-SAFETY with safety eye shower, for wall mounting

The B-SAFETY emergency shower combinations – combinations of body emergency showers and eye wash stations – are more space-saving than an individual installation. This creates the opportunity to establish a central point for first aid. The possible combination with a hand-held eye wash or hand-held shower also gives an injured person the option of treating minor injuries locally, without having to use the body emergency shower immediately.

The B-SAFETY body emergency showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as they are for harsh industrial use. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and cleanrooms.

The body emergency showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and DIN EN 15154, but is also self-draining, largely scale- and maintenance-free, as well as very robust and corrosion-resistant. The limited, uniform and, above all, soft water jet is optimised for rinsing chemicals off the skin. The B-SAFETY emergency shower is identified with the enclosed safety sign according to DIN EN ISO 7010 and ASR A1.3, and its visibility is improved. The recognition distance is 15 metres.

– Integrated PremiumLine safety eye wash with two wide-spraying, high-performance spray heads made of polished stainless steel, angled at 45°, with plastic spray plate, low-scale, including rubber protectors and tight-fitting dust caps with flip-top mechanism, mounted via a distributor fork, mounting height 810 mm (±100 mm)
– Wall flange with 4 mounting holes, made of polished stainless steel, water connection 3/4-inch female thread
– 3/4-inch ball valve made of stainless steel, with quick-mount system and pull rod actuation, pull rod with ring handle made of polished stainless steel, length 700 mm
– 3/4-inch wall shower arm made of polished stainless steel, projection 630 mm
– Connecting piece made of stainless steel, for quick on-site assembly and easy alignment of the shower arm
– Connecting pipe made of stainless steel for easy assembly and alignment of the shower, polished, water connection 3/4-inch male thread
– Two 3/4-inch connecting pipes made of polished stainless steel, total length 1500 mm
– Including upper and lower 3/4-inch female thread water connection for installation in circulation pipes, 3/4-inch plug made of stainless steel
– 1/2-inch ball valve made of stainless steel, with PUSH-lever operation, actuator plate made of polished stainless steel, length 130 mm, with large PUSH signal, photoluminescent according to DIN 67510
– Integrated automatic flow regulator 50 litres/minute for a standard-compliant spray pattern within a specified working range of 1.5 to 3 bar flow pressure
– According to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717, ANSI Z358.1-2014, DIN EN 15154-1:2006, DIN EN 15154-2:2006 and DIN EN 15154-5:2019. DIN-DVGW tested and certified