PremiumLine full-body emergency shower – B-SAFETY with eye shower and collection basin, for floor mounting

The free-standing industrial emergency showers are always used when wall mounting of the shower is not possible or when a central point of contact for first aid needs to be created. They are also useful in large halls and production facilities. A major advantage is the good visibility of the shower from all sides. The free-standing emergency showers can be adapted to the on-site requirements with a wide range of options, depending on the need.

The B-SAFETY body emergency showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for harsh use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and cleanrooms.

The body emergency showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and DIN EN 15154, but is also self-draining, largely scale- and maintenance-free, as well as very robust and corrosion-resistant. The limited, uniform and, above all, soft water jet is optimised for rinsing chemicals off the skin. With the enclosed safety sign according to DIN EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is identified and its visibility is improved. The recognition distance is 15 metres.

– Integrated PremiumLine safety eye wash with stainless steel bowl, mounting height 970 mm, orientation of the eye wash can be freely selected on site
– Two wide-spraying high-performance spray heads made of stainless steel, polished, with plastic spray plate, low-calcification, including rubber protectors and tight-fitting dust caps with flip-open mechanism, mounted via a distributor fork
– Bowl made of stainless steel, diameter 275 mm, polished, drain connection 1 1/4-inch male thread
– Standpipe 1 1/4-inch made of stainless steel, three-part, polished, with top and bottom water inlet 1 1/4-inch female thread, total height 2300 mm
– Base plate with 4 mounting holes, made of stainless steel, polished, diameter 200 mm
– Wall shower arm 3/4-inch made of stainless steel, polished, projection 630 mm, connecting piece made of stainless steel, for quick on-site assembly and easy alignment of the shower arm
– Ball valve 3/4-inch made of stainless steel, with quick-connect system and pull rod activation, pull rod with ring handle made of stainless steel, polished, length 700 mm
– Including top and bottom water inlet 1 1/4-inch female thread for installation in circulation pipes, plug 1 1/4-inch made of stainless steel
– Connection pipe made of stainless steel for simple assembly and alignment of the shower, polished
– Ball valve 1/2-inch made of stainless steel, with push-lever operation, actuation plate made of stainless steel, polished, length 240 mm, with large PUSH signal, photoluminescent according to DIN 67510
– Integrated automatic flow regulator 50 litres/minute for a standard-compliant spray pattern at a specified working range of 1.5 to 3 bar flow pressure
– According to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717, ANSI Z358.1-2014, DIN EN 15154-1:2006, DIN EN 15154-2:2006 and DIN EN 15154-5:2019. DIN-DVGW tested and certified