Ref.: 983740 10

Electric tank container pump – Lutz for concentrated acids and alkalis, set

Electric tank container pump – Lutz

pump set

3.950,00 €
Price / item (Ex. VAT)
Availability: 5-8 Working Days
Product description
  • For concentrated acids and alkalis
  • Ergonomically designed motor housing with an on/off switch that is easy to operate
  • Pump sets are pre-assembled and quickly ready for operation
  • Pump unit constructed without seals for operation even if the pump runs dry temporarily
  • Suitable pumps for all types of liquids
For sodium hypochlorite, phosphoric acid, highly concentrated saltpetre and sulphuric acids etc.
Description of pump set
PVDF pump, with a special chemical resistant 2.0 m hose DN 19, PVDF pump pistol, PP drum adapter.
Delivered partially assembled – easy final assembly.
For corrosive media or unspecified media, please enquire about compatibility beforehand.
The max. pump rate is a value determined by means of a test bench, measured with water as the medium at a temperature of approx. 20 °C. The measurement is made at the outlet port of the pump, without a hose, nozzle or flow meter. The pump rate that can be attained in use is lower, and depends on the individual job, the properties of the pumped medium and the configuration of the pump. The max. pumping height also depends on the pump design, motor and medium. The viscosity values are determined using oil.
Technical data
Design of pumpfor liquid storage container
For mediaconcentrated acids and alkalis
For liquidssodium hypochlorite, phosphoric acid, highly concentrated saltpetre and sulphuric acids, etc.
Material of pumppolyvinylidene fluoride (PVDF)
Drive shaft materialHC-4
Immersion depth1200 mm
Pump rate80 l/min
Pumping height17 m wc
Scope of deliveryPVDF pump, with a special chemical resistant 2.0 m hose DN 19, PVDF pump pistol, PP drum adapter
Power580 watt
Weight12 kg
Product typetank container pumps, electric
Suppliedassembled
Instructions
Sustainability
Product with potential for future improvement

This product does not yet meet enough of our sustainability criteria. This does not mean that it has no sustainable properties – however, the total score is lower than 3 points. Therefore, it is not (yet) labelled as particularly sustainable. Our sustainability assessment is based on transparent, clearly defined ecological, social and economic criteria. The aim is to highlight development potential and create greater transparency.

You can find out more about product evaluation and our sustainability initiative on our information page.
‌
‌
‌
‌
‌