Standard boltless shelving unit, zinc plated – eurokraft pro single sided

Other dimensions available upon request.

The ideal boltless shelving unit for warehouses, workshops and factories: configure your own shelving unit using standard and extension elements to suit your individual needs and the space available. Choose the number of shelves and the required shelf depth. Depending on the intended use, the max. load of the shelves can also be varied. The steel shelving unit can be assembled in no time at all. The zinc plated shelves can be adjusted in height in 25 mm increments without tools or screws. All standard elements feature a zinc plated diagonal cross brace to provide reinforcement, while the extension elements feature diagonal struts.

Supplied complete with floor anchors (zinc plated steel footplates) (bolts and plugs not included).
External dimensions
Standard shelf unit / extension shelf unit
Shelf width + 60 mm / + 10 mm.
Shelf depth + 35 mm each.

Please note:
If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping by means of suitable floor or wall fasteners (accessories).

Supplied complete with floor anchors (zinc plated steel footplates). Bolts and plugs not included.

The specified max. load values are applicable with uniform load distribution. Additional shelves may be used if the specified max. bay load is observed.