STANDARD Li-ion battery fire containment blanket – VLITEX WxH 4000 x 3000 mm

Take fire fighting measures – quickly and intuitively. The VLITEX STANDARD fire blanket can do this while also representing an environmentally friendly method of extinguishing conventional fires. No additional extinguishing agents, i.e. water, powder or foam, are required. The fire blanket is ideal wherever a fire needs to be contained quickly and in places where it is difficult to route hoses or that are hard to access for tank vehicles. It is transported to the location of the fire in a matching carry bag and is spread over the hazardous object. Fire fighting using silicone coated fibreglass blankets is a resource saving, environmentally friendly method. The fabric can withstand temperatures of up to 600 °C for sustained periods, and even up to 1000 °C for short periods. By cutting off the oxygen supply, a fire is extinguished within a short time. Depending on the fire load and damage such as cuts or holes, the blanket can be reused several times.

The German manufacturer VLITEX GmbH equips the fire service and industry with safety products based on technical fabrics. Tested according to the relevant standards:
– Temperature resistance certified by KIWA (+1000 °C)
– Electrical resistance in accordance with DIN 54345-1 confirmed by Hof University of Applied Sciences (< 1.0 x 10⁶ Ω)
– Cut resistance in accordance with ISO 13997:1999-08 confirmed by STFI (18.45 N)
– Reaction to fire in accordance with EN 13501 confirmed by MPA (A2)

Fire containment blanket for fires involving e-bikes, e-scooters, cleaning machines, etc.