+49 711 3465 6999 email@example.com
(Multiple selections possible)
Limit Ex. VAT
At the sight of the typically tiny pallet truck rollers, hardly a layman would suspect that they conceal a load capacity of several hundred kilograms. But the inconspicuous helpers in warehouse and transport logistics are really hard workers.
Every fork pallet truck has wheels and rollers that work together to ensure optimum transportability:
The right wheels and rollers are available for every working environment and every purpose. You can find out how to select them in the purchasing guide to wheels and castors.
Both the roller pairing and the materials of the coverings and the size of the rollers must match. We make the selection easier for you and put together the optimum combination of properties for you on each product page as soon as you have decided on a starting point. These starting points include, among others:
1. The covering material
Polyurethane and nylon are the most common and tried-and-tested materials for fork rollers. Nylon impresses with its smooth running properties and usually good resistance to chemicals. However, they do not run as smoothly as polyurethane rollers, which are kinder to sensitive floors.
Solid rubber is a cost-effective and manoeuvrable alternative for steering wheels. You will find further tips on the material in the purchasing guide to types of plastic.
These factors are closely interrelated. The possible combinations are therefore visually highlighted on the product page as soon as you specify a value. This ensures that you always find the right spare part for the respective pallet truck.
3. The load capacity
The operational capability of your pallet truck depends on the load capacity of the fork roller. For this reason, you should always consult a calculator and the exact load capacity specification on the type plate for the respective pallet truck. Please adhere to the maximum specifications for the truck.
Due to the centre of gravity of the load, the steering wheels have to, of course, be able to carry less than the fork rollers, but in this case too, the following principle applies: the equipment and the load determine the minimum requirements that must be met. And calculations with a greater tolerance prevent accidents and damage.
Changing rollers on the pallet truck is usually only due after years of intensive use. This is ensured by the high-quality materials and excellent workmanship. The change itself does not require any special instructions and is self-explanatory. All you have to do is make sure that the device is properly secured during replacement and then carry out an operational test, which needs to be carried out daily anyway.
The wheels and rollers on a pallet truck are also a component of the annual inspection according to DGUV V 68, which may only be carried out by a qualified employee.
If you need a specific roller that is not listed in the standard range, simply complete our product enquiry. It also allows you to ask your questions about our range of pallet truck rollers and our entire range.
|Hotline: +49 711 3465 6999 (Monday to Friday 7.30 am to 5.00 pm)||Webcode: 0WEB|
| Presselstr. 12 | 70191 Stuttgart | Telefon 0711/3465-60 | Telefax 0711/3465-6100 | E-Mail: firstname.lastname@example.org
Managing Director: Dr. Claude Tomaszewski | Registered Office: Stuttgart, Germany, Commercial Register of the Local Court of Stuttgart, HRB 20103 | Tax Act:: according to § 27 a : DE 199225340
+49 711 3465 6999 - Webcode 0WEB
Or write to us!
Order our catalogue
You can order our current catalogue here.
All prices without VAT! Our offers apply to industry, commerce, craft, trade and self-employed workers.
All prices EX WORKS (INCOTERMS 2010) our stock in Germany.