Load stopper for pallet base and transport floor – ratioform pack of 2

Secure load carriers against slippage quickly and easily. The effective alternative to non-slip matting. Suitable for wood-wood surfaces, whereby the load stopper is placed between the pallet, collapsible wooden box or a similar load carrier, and the wooden or wood composite floor of a transport vehicle. When let down, the prongs on the respective load stopper are anchored in the floor of the transport vehicle and the load carrier. Use at least two per pallet.
Multifunctional skin packaging due to cardboard strip: on the one hand, the distance is maintained when lowering, and the risk of injury is virtually eliminated; on the other hand, the marking is essential for inspections as well as for locating and removing load securing devices.

Important information: load stoppers will not secure the load against tipping, and separate precautions must be taken – for example, by using tensioning or cargo restraint straps. The effectiveness depends on the model used and the anchor depth. The maximum holding force is only achieved when fully anchored.